Nokia (5630) készülék alapállapotba hozása

hard reset: *#7370#

soft reset: *#7780#

Nokia 5630 XpressMusic SIP Settings for voip client setup

http://www.voipvoip.com/nokia/5630-XpressMusic.html

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia 5630 XpressMusic phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Configuration Guide

BEFORE YOU BEGIN, please note the following:

On the Nokia 5630 XpressMusic VoIP settings are hidden by default, and you will need Nokia's new VoIP SIP application.

This application can be used to configure VoIP settings on your Nokia. You can create new VoIP profiles and modify the existing ones, and create and modify VoIP parameters and NAT/Firewall traversal settings and that are normally not visible on the device UI, such as codec settings and SIP domain-specific NAT/FW settings. It is also possible to save all the VoIP profile settings to a text file. It also enables VoIP over WCDMA which means you can make VoIP call over 3G Internet connection.

Once you confirm you have 3G Internet connection, using your PC download freeNokia SIP VoIP application from here or check Nokia web site for latest version.

Extract and install SIS file using Nokia PC Suite software on your PC.

Once installation is complete you will be able to see VoIP settings on your Nokia. After installing, restart your phone, and you will find a new tab in your contacts, called "Provider". There you can activate or disconnect the internet phone service.

Below you can find Nokia 5630 XpressMusic SIP settings for voip setup configuration guide with VoIPVoIP service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: VoIPVoIP Service

Profile: IETF Default

Access point: (your WLAN AP name)

Public user name: 5551231234@sip3.voipvoip.com ( Instead of 5551231234 account number example, use the account number assigned to you when signed up for VoIPVoIP service. When recorded your phone will show sip:5551231234@sip3.voipvoip.com )

Use Compression: No

Registration: "Always on "

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

*Registrar Server:*none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: sip3.voipvoip.com (When recorded your phone will show sip:sip3.voipvoip.com)

Realm: voipvoip.com

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for VoIPVoIP service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for "voipvoip"(555123xxxx), name it "voipvoip"

In Connectivity / Internet tel. / Preferred profile

Choose "voipvoip"

STEP 5

For better voice quality or in order to be able to make VoIP calls over 3G internet connection you need to use Nokia SIP VoIP Application you installed.

Go to Applications on your phone and click on "SIP VoIP Settings" application. Choose VoIP services/VoIPVoIP (or the name of your VoIPVoIP account Internet profile.)

Click on "Profile Settings" and find "Allow VoIP over WCDMA" option and change it to "ON" This change allows VoIP over 3G connection on Nokia phones.

For better voice quality go to Codecs and delete all codecs except G729. There should be only G729 codec left under codecs settings

STEP 6

Reboot your phone. Once your phone is back on it will automatically register to VoIPVoIP.

Once it is registered you can start making calls.

Default call type: To switch between normal GSM calls or VOIP calls, navigate to Tools / Settings / Call / Default call type. Select Cellular to make normal calls to the phone number or Internet to use VoIP to call the number or address

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

For example if you want to call Brazil (country code 55) phone number in Rio de Janeiro (city code 21) you must dial 5521 and phone number. + sign can also be used and number can be dialed as +5521xxxxxxx

Problems? Please click here for our voip troubleshooter.

How do I setup RoadSync 5.0 to sync with Gmail/Google Sync?

Answer:

Basic support for GoogleSync (push Gmail, Google Calendar, Google Contacts, email attachments) was added in RoadSync 5.0 for S60. In order to synchronize RoadSync with your Gmail/Google Sync account, you will need to enter the following server settings in RoadSync:| Server: | m.google.com |

If your Gmail/Google Sync account does not end with "gmail.com" please note the following:

• googlemail.com
  If you have a googlemail.com address, you will need to enter [user]@gmail.com as your username instead of your normal email address (you will still receive emails sent to either address).
• Google Apps
  If you use Google Apps, your email is powered by Gmail/Google Sync but your email address may not end in "gmail.com". You will need to enter your regular email address as the username in your server settings even if it is not a gmail.com address.
  If you are unable to sync, you (or your IT Admin) may need to enable the option for "Google Sync" in the Service settings section of your Dashboard. The steps to enable Google Sync can be found on the Google Apps support site here: